Cyclic homogeneous Riemannian manifolds

In spin geometry, traceless cyclic homogeneous Riemannian manifolds equipped with a homogeneous spin structure can be viewed as the simplest manifolds after Riemannian symmetric spin spaces. In this paper, we give some characterizations and properties of cyclic and traceless cyclic homogeneous Riemannian manifolds and we obtain the classification of simply-connected cyclic homogeneous Riemannian manifolds of dimension less than or equal to four. We also present a wide list of examples of non-compact irreducible Riemannian $3$-symmetric spaces admitting cyclic metrics and give the expression of these metrics

Homogeneous spin Riemannian manifolds with the simplest Dirac operator

We show the existence of nonsymmetric homogeneous spin Riemannian manifolds whose Dirac operator is like that on a Riemannian symmetric spin space. Such manifolds are exactly the homogeneous spin Riemannian manifolds $(M,g)$ which are traceless cyclic with respect to some quotient expression $M=G/K$ and reductive decomposition $\mathfrak{g} = \mathfrak{k} \oplus \mathfrak{m}$. Using transversally symmetric fibrations of noncompact type, we give a list of them

Competencias profesionales de los bibliotecarios de ciencias de la salud en el siglo XXI

The XXI Century faces librarians with great challenges, as a consequence of the development of new technologies and their incorporation to different scenarios where information takes forms beyond the traditional products and services of a library. The changes that have characterized the transit towards a different paradigm for the scientific information activity are approached. An analysis is made of the need of developing new abilities and knowledge among librarians, as part of a process of informational literacy. The differences between the traditional librarian model and the model of the management librarian are stated, and some of the professional competences librarians should develop to deal with the new functions imposed to them by the information society are established

Novel types of anti-ecloud surfaces

In high power RF devices for space, secondary electron emission appears as the main parameter governing the multipactor effect and as well as the e-cloud in large accelerators. Critical experimental activities included development of coatings with low secondary electron emission yield (SEY) for steel (large accelerators) and aluminium (space applications). Coatings with surface roughness of high aspect ratio producing the so-call secondary emission suppression effect appear as the selected strategy. In this work a detailed study of the SEY of these technological coatings and also the experimental deposition methods (PVD and electrochemical) are presented. The coating-design approach selected for new low SEY coatings include rough metals (Ag, Au, Al), rough alloys (NEG), particulated and magnetized surfaces, and also graphene like coatings. It was found that surface roughness also mitigate the SEY deterioration due to aging processes.Comment: 4 pages, contribution to the Joint INFN-CERN-EuCARD-AccNet Workshop on Electron-Cloud Effects: ECLOUD'12; 5-9 Jun 2012, La Biodola, Isola d'Elba, Italy; CERN Yellow Report CERN-2013-002, pp.153-15

Emissions of Fe(II) and its kinetic of oxidation at Tagoro submarine volcano, El Hierro

The eruptive process that took place in October 2011 in the submarine volcano Tagoro off the Island of El Hierro and the subsequent degasification stage, five months later, have increased the concentration of TdFe(II) (Total dissolved iron(II)) in thewaters nearest to the volcanic edifice. In order to detect any variation in concentrations of TdFe(II) due to hydrothermal emissions, three cruiseswere carried out two years after the eruptive process in October 2013,March 2014 andMay 2015. The results fromthese cruises confirmed important positive anomalies in TdFe(II), which coincided with negatives anomalies in pHF,is (pH in free scale, at in situ conditions) located in the proximity of themain cone. Maximumvalues in TdFe(II) both at the surface, associated to chlorophyll a maximum, and at the sea bottom, were also observed, showing the important influence of organic complexation and particle re-suspension processes. Temporal variability studies were carried out over periods ranging from hours to days in the stations located over themain and two secondary cones in the volcanic edifice with positive anomalies in TdFe(II) concentrations and negative anomalies in pHF,is values. Observations showed an important variability in both pHF,is and TdFe(II) concentrations, which indicated the volcanic area was affected by a degasification process that remained in the volcano after the eruptive phase had ceased. Fe(II) oxidation kinetic studies were also undertaken in order to analyze the effects of the seawater properties in the proximities of the volcano on the oxidation rate constants and t1/2 (half-life time) of ferrous iron. The increased TdFe(II) concentrations and the low associated pHF,is values acted as an important fertilization event in the seawater around the Tagoro volcano at the Island of El Hierro providing optimal conditions for the regeneration of the area.En prens

Factors involved in soil organic matter stabilization in Peruvian Amazonian soils (Ucayali region) and the molecular composition of extractable lipids

Poster E1012b presentado en el 27th International Meeting on Organic Geochemistry September 13–18, 2015, Prague, Czech RepublicAmazonian ecosystems are considered important sinks for atmospheric CO2 on Earth. It is therefore desirable to preserve their biodiversity and productivity. In this communication an assessment of the influence of different agro-forestry practices on soil C storage in representative ecosystems from the Peruvian Ucayali region is approached by analyzing the soil lipid fraction. In fact, this organic matter fraction is an important source of analytical surrogates of soil C stabilization and accumulation processes (Naafs at al., 2004; Poulenard et al., 2004; Rumpel et al., 2004). Top (0–20 cm) and subsoil (20–40 cm) samples were taken from the Amazonian Ucayali region (Pucallpa, Perú), ranging from recent alluvial soils in muddy zones of riverside areas (wetlands referred to as ‘mud’, ‘beach’ and low ‘restinga’ soils) to more developed soils located in medium and higher riverine terraces, as well as in hills. The lipid fraction was Soxhlet extracted with a mixture of ichloromethane:methanol (2:1 by vol.), saponified and divided into neutral and acid subfractions. The acid fractions were then sequentially methylated and silylated prior to the chromatographic analysis (González-Vila et al., 2003). Neutral and acid sub-fractions were separated and the major compounds were identified by gas chromatography-mass spectrometry using an HP G1800A GCD System (electron impact detector at 70 eV) equipped with a DB-5 fused silica capillary column (30 m × 0.32 mm i.d., film thickness 0.25 µm) and using He as carrier gas at a flow rate of 1.5 mL min-1. The chromatographic oven temperature was programmed to increase from 40 to 100 ºC at 30 ºC min-1 and then to 300 ºC at 6 ºC min -1. The values of soil organic matter and lipids ranged from 25.8 to 5.8 g kg-1, and from 5.2 to 0.2 g kg-1, respectively. This variability as well as the differences in lipid molecular composition could suggest differences in the soils’ use and management practices (Van Bergen et al.,1996). The main families of signature lipids detected in the soil extracts were n-alkanes, linear isoprenoids, cyclic alkanes, n-fatty acids, branched fatty acids, unsaturated fatty acids, hydroxyacids, n-alcohols, ketones, polycyclic hydrocarbons and sterols. Very significant differences in qualitative and quantitative lipid composition were found in terms of soil depth. This effect was more pronounced in the soils from the riverine high terraces devoted to agro-forestry practices (Figs. 1 and 2). In addition, lipidic compounds of high molecular weight (i.e., di- and triterpenes) were detected as regular components of the free lipid fractions from the different ecosystems (wetlands, terraces and hills) reflecting specific vegetation and soil-use influences. Xenobiotic compounds (naphthenic acids) detected within the unresolved chromatographic ‘hump’ (highly unresolved mixture of cyclic or branched hydrocarbons) were also observed, indicating anthropogenic contamination by mineral oils. Likewise, dialkyl phthalates (Phth) from plasticizers were also detected.Projects CGL2012-38655-C04-01 and CGL2008-04296 and fellowship BES-2013-062573 given to N.T.J.M by the Spanish Ministry of Economy and Competitiveness. Dr. J.M.R. is the recipient of a fellowship from the JAE-Doc subprogram financed by the CSIC and the European Social Fund.Peer Reviewe

Low and high Reynolds number flows inside Taylor cones

Liquid motions inside Taylor cones exhibit interesting features which are not well understood yet. In addition to the flow rate injected through the electrified needle to which the conical meniscus is anchored, the action of the tangential electrical stress on the cone surface induces a recirculating meridional motion, towards the apex along the generatrix and away from it along the axis. Sometimes, a vigorous swirl is observed. The characteristic value of the liquid velocity is found to be highly dependent on both the electrical conductivity and the viscosity of the liquid, so that the Reynolds number of the liquid flow varies from very small values (creeping flow) for the case of highly conducting and viscous liquids to relatively large values for liquids with sufficiently low values of the liquid conductivity and viscosity. Theoretical conical flows for low and high values of the Reynolds number show qualitatively good agreement with photographs of real flows inside Taylor cones. In particular, the existence of a vigorous swirl which is observed in the electrospraying of paraffins and other poorly conducting and low viscosity liquids can be explained as bifurcation of a primarily nonswirling meridional flow when the Reynolds number reaches a critical value.Comisión Interministerial de Ciencia y Tecnología PB96-0679-C02-0

Priority projects for the implementation of CCS power generation with enhanced oil recovery in Mexico

In March 2014, Mexico launched its CCUS technology roadmap, outlining the actions to be taken up to 2024. One important action is the National Policy of Carbon Capture and Storage (CCS) ready and the identification of priority natural gas combined cycle (NGCC) with capture plants. This outcome could aid the creation of a technology roadmap for the design of new NGCC power plants and their operational requirements for EOR and for the reduction of CO 2 emissions. This article provides an overview of the opportunities for deploying CCS in new NGCC power plants in Mexico which were programed to begin operation throughout the period from 2016 to 2030. The attention is given to plants close to oil fields which are candidates for enhanced oil recovery (EOR), located in an inclusion zone suitable for storage. The Gulf of Mexico region, where potential EOR sites and the presence of industrial CO 2 sources are located, is within the inclusion zone for recommended sites for geological storage of CO 2 . After identifying new power plants in the inclusion zone, this article analyses which existing plants could be retrofitted and which new power plants could be designed to be ‘carbon capture ready’. In addition, the distance and the volumes of CO 2 are estimated